ummm.... this device is not a dvd burner, dvd reader, or cd burner combo. It's a Dual-Tuner/HD DVD Recorder
and has nothing to do with cd or dvd disks or cd/dvd drives and is normally distributed by cable operators to their customers. I cannot see how it could possibly need or require a driver.
Perhaps if you told us what your trying to accomplish, we might have a solution.
On the back side you have 3 connectors:
Connect the HDTV HDMI connector to the HDMI port. HDMI supports both digital audio and video.
May be used to connect to a DVI interface using an adaptor.
Connect to an external Serial ATA (SATA) hard disk drive for expanded recording capacity.
Check with your cable service provider for a list of approved hard drive models for use with the 8300HD.
1394 Firewire port:
Connect to display devices equipped with a 1394 input. This connector is
reserved for future use and may not be available on all 8300HD models.
On the front panel there is only one USB port connector.
It connects to external equipment, such as a keyboard.
This connector is reserved for future use and may not be available on all 8300HD models.
User manual in pdf format:
Additional info about this unit can be found here:
A lot of good info about this box: