DRIVER NEEDED: Mustek GS-400 (Windows XP Professional) FCCID=HWF92HS800A

Due to disk damage i am needing "Scankit Utility 2.2e"

i have tried other drivers with no success.

the interface board is GI 1904A (IDE)

the scanner is a hand held 256 gray scale.

if Anyone has a copy i would be most grateful if i could obtain a copy.

thank you

have a good one

rob sherwood

Ottawa canada





Support Information:
Device Type: Scanner
Manufacturer: Mustek
Model: GS-400
Interface: IDE
Operating System: Windows XP Professional
Age of Device: < 2 years old
FCCID: HWF92HS800A

Find it on DriverGuide | Find it with Google
----
Send an email to rob sherwood through DriverGuide's contact form

[Jerry K]

: Due to disk damage i am needing "Scankit Utility 2.2e"

: i have tried other drivers with no success.

: the interface board is GI 1904A (IDE)

: the scanner is a hand held 256 gray scale.

: if Anyone has a copy i would be most grateful if i could obtain a copy.

: thank you

: have a good one

: rob sherwood

: Ottawa canada
:

:
I looked on a couple of Mustek sites but found nothing for this model. You may want to check them all out.
http://www.mustek.com.tw/Download/mustekdrivers.html





Support Information:
: Device Type:
Scanner
: Manufacturer:
Mustek
: Model:
GS-400
: Interface:
IDE
: Operating System:
Windows XP Professional
: Age of Device:
< 2 years old
: FCCID:
HWF92HS800A

: Due to disk damage i am needing "Scankit Utility 2.2e"

: i have tried other drivers with no success.

: the interface board is GI 1904A (IDE)

: the scanner is a hand held 256 gray scale.

: if Anyone has a copy i would be most grateful if i could obtain a copy.

: thank you

: have a good one

: rob sherwood

: Ottawa canada
:

:
:
:
:




Support Information:
: Device Type:
Scanner
: Manufacturer:
Mustek
: Model:
GS-400
: Interface:
IDE
: Operating System:
Windows XP Professional
: Age of Device:
< 2 years old
: FCCID:
HWF92HS800A

Find it on DriverGuide | Find it with Google
----
Send an email to ula through DriverGuide's contact form