DRIVER NEEDED: LG Electronics CRD-8522B (Windows 2000 Workstation)

Need this driver as Windows default driver is inadequate. Search only finds for Win 3.1
Type of drive:
cd-rom (reader only)


Location:
internal


What recording software are you using?:
Nero/version





Support Information:
Device Type: CD-ROM / CDRW / DVD
Manufacturer: LG Electronics
Model: CRD-8522B
Interface: IDE
Operating System: Windows 2000 Workstation
Age of Device: < 2 years old
FCCID:

Find it on DriverGuide | Find it with Google | Research manufacturer LG Electronics

----
Send an email to Richard through DriverGuide's contact form

[Jerry K]

: Need this driver as Windows default driver is inadequate. Search only finds for Win 3.1
:
: Type of drive:
cd-rom (reader only)


: Location:
internal


: What recording software are you using?:
Nero/version
"Windows default driver is inadequate"... how? What's wrong with it? That's the only Windows support available. There is nothing else except DOS drivers..that same one for Win 3.1. It will not help you in Windows 2000.
When properly connected/configured, the os should recognize the drive during bootup and a listing should appear in Device Manager under CD-ROM showing the drive. If the os fails to detect the drive, here are the most common reasons:
1: Improperly connected ide ribbon cable or defective cable/connectors.

2: Master/Slave jumper not set correctly.

3: Problem with the ide port to which the drive is connected or...

4: Wrong ide drivers installed.

5: IDE port is disabled in bios.

6: Improperly flashed firmware

7: Defective drive.





Support Information:
: Device Type:
CD-ROM / CDRW / DVD
: Manufacturer:
LG Electronics
: Model:
CRD-8522B
: Interface:
IDE
: Operating System:
Windows 2000 Workstation
: Age of Device:
< 2 years old
: FCCID: