DRIVER NEEDED: E3works discclone I (Windows XP Home)

#1 10-22-2005

Type of drive:
cd-r (cd-r burner & cd-rom)

Location:
external

What recording software are you using?:
Easy Cd Creator/version

Support Information:
Device Type: CD-ROM / CDRW / DVD
Manufacturer: E3works
Model: discclone I
Interface: USB
Operating System: Windows XP Home
Age of Device: < 2 years old
FCCID:

Find it on DriverGuide | Find it with Google | Research manufacturer E3works

----
Send an email to Don Wood through DriverGuide's contact form

**Jerry K** · #2 10-22-2005

:
:
: Type of drive:
cd-r (cd-r burner & cd-rom)

: Location:
external

: What recording software are you using?:
Easy Cd Creator/version

USB connected optical drives do not require any drive when used in Windows XP. The os provides native support that allows this drive to read a data or music disk and to burn a cd-r disk. Optional 3rd party recording software may also be used.
If your usb port is working properly and the drive is configured properly inside the usb enclosure, the system will automatically detect/install this device within 4-5 seconds after it's plugged into a usb port.
What happens when it's plugged in? Any notification of "new hardware found"?

Support Information:
: Device Type:
CD-ROM / CDRW / DVD
: Manufacturer:
E3works
: Model:
discclone I
: Interface:
USB
: Operating System:
Windows XP Home
: Age of Device:
< 2 years old
: FCCID:

#3 10-23-2005

: :
: :
: : Type of drive:
cd-r (cd-r burner & cd-rom)

: : Location:
external

: : What recording software are you using?:
Easy Cd Creator/version
:

: USB connected optical drives do not require any drive when used in Windows XP. The os provides native support that allows this drive to read a data or music disk and to burn a cd-r disk. Optional 3rd party recording software may also be used.
: If your usb port is working properly and the drive is configured properly inside the usb enclosure, the system will automatically detect/install this device within 4-5 seconds after it's plugged into a usb port.
: What happens when it's plugged in? Any notification of "new hardware found"?

New hardware is found. In the device manager it shows that XP found a "mass storage device". It also shows the error message "This device cannot start. (Code 10)".

Support Information:
: : Device Type:
CD-ROM / CDRW / DVD
: : Manufacturer:
E3works
: : Model:
discclone I
: : Interface:
USB
: : Operating System:
Windows XP Home
: : Age of Device:
< 2 years old
: : FCCID:

----
Send an email to Don Wood through DriverGuide's contact form

**Jerry K** · #4 10-23-2005

: : :
: : :
: : : Type of drive:
cd-r (cd-r burner & cd-rom)

: : : Location:
external

: : : What recording software are you using?:
Easy Cd Creator/version
: :

: : USB connected optical drives do not require any drive when used in Windows XP. The os provides native support that allows this drive to read a data or music disk and to burn a cd-r disk. Optional 3rd party recording software may also be used.
: : If your usb port is working properly and the drive is configured properly inside the usb enclosure, the system will automatically detect/install this device within 4-5 seconds after it's plugged into a usb port.
: : What happens when it's plugged in? Any notification of "new hardware found"?
:

: New hardware is found. In the device manager it shows that XP found a "mass storage device". It also shows the error message "This device cannot start. (Code 10)".
Is your usb port usb 1.1 or usb 2.0?
What is the usb enclosure? usb 1.1 or usb 2.0?
What is the condition of your usb port in device manager?
You won't get usb 2.0 support unless you have SP1 or SP2 installed. eg: Windows Update or Microsoft website for XP service packs.
http://support.microsoft.com/default...;en-us;Q314634
Windows XP Error Codes Explained

Support Information:
: : : Device Type:
CD-ROM / CDRW / DVD
: : : Manufacturer:
E3works
: : : Model:
discclone I
: : : Interface:
USB
: : : Operating System:
Windows XP Home
: : : Age of Device:
< 2 years old
: : : FCCID:

#5 10-23-2005

: : : :
: : : :
: : : : Type of drive:
cd-r (cd-r burner & cd-rom)

: : : : Location:
external

: : : : What recording software are you using?:
Easy Cd Creator/version
: : :

: : : USB connected optical drives do not require any drive when used in Windows XP. The os provides native support that allows this drive to read a data or music disk and to burn a cd-r disk. Optional 3rd party recording software may also be used.
: : : If your usb port is working properly and the drive is configured properly inside the usb enclosure, the system will automatically detect/install this device within 4-5 seconds after it's plugged into a usb port.
: : : What happens when it's plugged in? Any notification of "new hardware found"?
: :

: : New hardware is found. In the device manager it shows that XP found a "mass storage device". It also shows the error message "This device cannot start. (Code 10)".
: Is your usb port usb 1.1 or usb 2.0?
: What is the usb enclosure? usb 1.1 or usb 2.0?
: What is the condition of your usb port in device manager?
: You won't get usb 2.0 support unless you have SP1 or SP2 installed. eg: Windows Update or Microsoft website for XP service packs.
:
http://support.microsoft.com/default...;en-us;Q314634
:
Windows XP Error Codes Explained
Your suggestions worked. I already have SP2 installed so I followed the instructions for modifying the registry and it worked. The usb key was not in the register so I had to add it like Microsoft suggested.

Thanks a lot

Don

Support Information:
: : : : Device Type:
CD-ROM / CDRW / DVD
: : : : Manufacturer:
E3works
: : : : Model:
discclone I
: : : : Interface:
USB
: : : : Operating System:
Windows XP Home
: : : : Age of Device:
< 2 years old
: : : : FCCID:

----
Send an email to Don Wood through DriverGuide's contact form

**Jerry K** · #6 10-24-2005

: : : : :
: : : : :
: : : : : Type of drive:
cd-r (cd-r burner & cd-rom)

: : : : : Location:
external

: : : : : What recording software are you using?:
Easy Cd Creator/version
: : : :

: : : : USB connected optical drives do not require any drive when used in Windows XP. The os provides native support that allows this drive to read a data or music disk and to burn a cd-r disk. Optional 3rd party recording software may also be used.
: : : : If your usb port is working properly and the drive is configured properly inside the usb enclosure, the system will automatically detect/install this device within 4-5 seconds after it's plugged into a usb port.
: : : : What happens when it's plugged in? Any notification of "new hardware found"?
: : :

: : : New hardware is found. In the device manager it shows that XP found a "mass storage device". It also shows the error message "This device cannot start. (Code 10)".
: : Is your usb port usb 1.1 or usb 2.0?
: : What is the usb enclosure? usb 1.1 or usb 2.0?
: : What is the condition of your usb port in device manager?
: : You won't get usb 2.0 support unless you have SP1 or SP2 installed. eg: Windows Update or Microsoft website for XP service packs.
: :
http://support.microsoft.com/default...;en-us;Q314634
: :
Windows XP Error Codes Explained
: Your suggestions worked. I already have SP2 installed so I followed the instructions for modifying the registry and it worked. The usb key was not in the register so I had to add it like Microsoft suggested.

: Thanks a lot

: Don
Excellent, Glad the link helped.

Support Information:
: : : : : Device Type:
CD-ROM / CDRW / DVD
: : : : : Manufacturer:
E3works
: : : : : Model:
discclone I
: : : : : Interface:
USB
: : : : : Operating System:
Windows XP Home
: : : : : Age of Device:
< 2 years old
: : : : : FCCID: