DRIVER NEEDED: Sony Electronics external CDRW (Windows 2000 Workstation)

I have a Sony CDRW drive enclosed in an external case and connected by USB. I need to get the necessary drivers for it since the CD I have is not reading properly. The CD contains plumax drivers.
Type of drive:
cd-rw, cd-rom (rewriter & reader)


Location:
external


What recording software are you using?:
NTI Cd Maker/version





Support Information:
Device Type: CD-ROM / CDRW / DVD
Manufacturer: Sony Electronics
Model: external CDRW
Interface: USB
Operating System: Windows 2000 Workstation
Age of Device: < 2 years old
FCCID:

Find it on DriverGuide | Find it with Google | Research manufacturer Sony Electronics

[Jerry K]

: I have a Sony CDRW drive enclosed in an external case and connected by USB. I need to get the necessary drivers for it since the CD I have is not reading properly. The CD contains plumax drivers.
:
: Type of drive:
cd-rw, cd-rom (rewriter & reader)


: Location:
external


: What recording software are you using?:
NTI Cd Maker/version
Optical drives never require a driver when used in any Windows os from 95 up. External optical drives connected via usb only require a driver if your os is Windows 98. And this is only to allow the system to see the drive... it's called a usb enclosure/port driver. Since it's not and your running Windows 2000, you don't need any driver. Your drive only requires proper configuration inside the usb enclosure and connection to a working usb port. It should be recognized within 4-5 seconds after plugging it in. Make sure you have updates service packs for your os installed. That will insure usb compatibility.







Support Information:
: Device Type:
CD-ROM / CDRW / DVD
: Manufacturer:
Sony Electronics
: Model:
external CDRW
: Interface:
USB
: Operating System:
Windows 2000 Workstation
: Age of Device:
< 2 years old
: FCCID: