DRIVER NEEDED: Chuntex CD-52S (Windows 95)

Driver lost; need one
Type of drive:
cd-rom (reader only)


Location:
internal


What recording software are you using?:
Easy Cd Creator/version





Support Information:
Device Type: CD-ROM / CDRW / DVD
Manufacturer: Chuntex
Model: CD-52S
Interface: Other
Operating System: Windows 95
Age of Device: < 2 years old
FCCID:

Find it on DriverGuide | Find it with Google

[Jerry K]

: Driver lost; need one
:
: Type of drive:
cd-rom (reader only)


: Location:
internal


: What recording software are you using?:
Easy Cd Creator/version
Internal cd-rom drives never require a driver when used in any Windows os from 95 up. Support is provided natively by the os.
When properly connected/configured, the os should recognize the drive during bootup and a listing should appear in Device Manager under CD-ROM showing the drive. If the os fails to detect the drive, here are the most common reasons:
1: Improperly connected ide ribbon cable or defective cable/connectors.

2: Master/Slave jumper not set correctly.

3: Problem with the ide port to which the drive is connected or...

4: Wrong ide drivers installed.

5: IDE port is disabled in bios.

6: Improperly flashed firmware

7: Defective drive.







Support Information:
: Device Type:
CD-ROM / CDRW / DVD
: Manufacturer:
Chuntex
: Model:
CD-52S
: Interface:
Other
: Operating System:
Windows 95
: Age of Device:
< 2 years old
: FCCID:

: Driver lost; need one
:
: Type of drive:
cd-rom (reader only)


: Location:
internal


: What recording software are you using?:
Easy Cd Creator/version
:

:
:
:My operating system is Window 2000.
Please advsie the device CD-52S is what type device (CD-Rom or CD-RW or DVD).
Thank you







Support Information:
: Device Type:
CD-ROM / CDRW / DVD
: Manufacturer:
Chuntex
: Model:
CD-52S
: Interface:
Other
: Operating System:
Windows 2000
: Age of Device:
< 5 years old
: FCCID:

Find it on DriverGuide | Find it with Google
----
Send an email to H.L. Lam through DriverGuide's contact form