Re: yaho problems
I think you meant "Yahoo problems" rather than "yaho problems". And "DSP Group TrueSpeech(TM) Audio CODEC to load" rather than "DSP Group TrueSpeech(TM) Audio CODE to lode". Nothing that couldn't be fixed using the EDIT button.
"DSP Group TrueSpeech(TM) Audio CODEC" should be included with most any decoder package.
1-Press the "Start" button in the lower left corner of the screen.
2-Select "Settings," then "Control Panel," then "Multimedia." The Multimedia
Properties window should be displayed.
3-Click on the "Devices" tab.
4-Click on the plus-symbol (+) next to "Audio Compression Codecs" to expand
the list of installed codecs.
5-If "DSP Group TrueSpeech(TM) Audio CODEC" is displayed, go to step 13.
6-If "DSP Group TrueSpeech(TM) Audio CODEC" is not displayed, it needs to be installed. You will need your Windows CD-ROM (or will need to locate the
Windows installation files on your computer).
7-Press the "Add" button. The Add window should be displayed.
8-Select "DSP Group TrueSpeech(TM) Audio CODEC" from the list of drivers,
then press the "OK" button.
9-If the "Driver Exists" warning is displayed, press the "Current" button.
10-You will be prompted to restart Windows. You may restart now or later,
but the codec will not be available until you restart your computer.
11-If you are still receiving the same error message after restarting your
computer, continue to the next step.
12-Open the Multimedia Devices window as directed in steps 1-4.
13-Select "DSP Group TrueSpeech(TM) Audio CODEC" from the list of Multimedia
Devices, and press the "Properties" button. The Properties window is
14-Verify that "Use this audio codec" is selected and press the "OK" button.
Press the "OK" button in the Multimedia Properties window, and try to start
a voice chat again.
Alternately, if you've ever used the Ace Mega Codec Pack, it uses this codec and if you uninstall it then it gets removed. To fix it just download the Ace Mega Codec Pack, run the install, select only the dsp truespeech codec (uncheck everything else) and install it to c:winnt/i386 folder might be different for your system but install to your i386 folder and then reboot and all should be good.
Or you can download FFDShow Codec Pack from this site: [url]http://dl.video-buzz.com/Download/index.aspx?s=ffdshow&c=795169&SessionId=89362fc6-7fcd-4e6b-a2d2-4d1dafcaf3d6&BrowserMapId=1980&fn=PBhPDg6eC&adid=3 287230550[/url]
Or you can download tsp_codec_install.exe to fix your problem: [url]http://www.bytescribe.com/downloads/tsp_codec_install.exe[/url]
Or you can download ACM Converter ActiveX (OCX) - 1.0 here: [url]http://www.download32.com/dsp-group-true-speech-tm-audio-codec-software.html[/url]
And this page will give you additional options: [url]http://www.ask.com/questions-about/DSP-Group-Truespeech-TM-Audio-CODEC[/url]
Last edited by Jerry K : 12-14-2010 at 02:54 AM.