I am trying to set up a kt33f-anb have tried 2 agp boards and get the 1 long 2 short beep error code with both. No video. I'm thinking I need to upgrade the bios. currently using award v6.00pg. Is there an upgrade or anyone have ideas on how to make this work.

AMI BIOS BEEP CODES

The following are AMI BIOS Beep Codes that can occur. However because of the wide variety of different computer manufacturers with this BIOS the beep codes may vary.

Beep Code Descriptions
1 short DRAM refresh failure
2 short Parity circuit failure
3 short Base 64K RAM failure
4 short System timer failure
5 short Process failure
6 short Keyboard controller Gate A20 error
7 short Virtual mode exception error
8 short Display memory Read/Write test failure
9 short ROM BIOS checksum failure
10 short CMOS shutdown Read/Write error
11 short Cache Memory error
1 long, 3 short Conventional/Extended memory failure
1 long, 8 short Display/Retrace test failed

AWARD BIOS BEEP CODES

The following are Award BIOS Beep Codes that can occur. However because of the wide variety of different computer manufacturers with this BIOS the beep codes may vary.

Beep Code Description
1 long, 2 short Indicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information
Any other beep(s) RAM problem.

I am trying to set up a kt33f-anb have tried 2 agp boards and get the 1 long 2 short beep error code with both. No video. I'm thinking I need to upgrade the bios. currently using award v6.00pg. Is there an upgrade or anyone have ideas on how to make this work.
I know this may sound to easy but try a regular video card get into system bios ,find primary video change to agp.

I am trying to set up a kt33f-anb have tried 2 agp boards and get the 1 long 2 short beep error code with both. No video. I'm thinking I need to upgrade the bios. currently using award v6.00pg. Is there an upgrade or anyone have ideas on how to make this work.

if the mobo as onboard gfx try resetting bios with card in slot or try a pci card instead you could be using wrong voltage cards.