I bought this scanner at a yard sale so I'm not expecting but so much from it. I installed the disk ScanOffix. Every time i try to open the program, I get an error and it shuts down. I also cannot get the scanner to TURN ON. There are 2 green buttons, neither marked nor mentioned in the manual. My computer is recognizing the printer that is plugged in through the scanner so obviously it has a connection. I have quadruple checked all connections. The TWAIN driver disk is mentioned at some point in the manual but it is unclear if it's included in the scanoffix install or what. I have went ito my system and all I can see is a chipset configuration, but you cannot access the BIOS to arrange a parrell port there. I could just scream! Any suggestions would be very much appreciated! Thanks!

Support Information:
Device Type: Scanner
Manufacturer: Digital Research Technologies
Model: SF-600E2
Interface: Parallel Port
Operating System: Windows XP Home
Age of Device: Not specified
FCCID:

Find it on DriverGuide (http://members.driverguide.com/index.php?action=srch&sm=b&aax=&qa6=318&qa5=17&qa7=1500&dp=3&qm0=SF-600E2&jmd=and&fzz=d) | Find it with Google (http://www.google.com/search?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=Digital+Research+Technologies+Scanner++SF-600E2+Windows+XP+Home+) | Research manufacturer Digital Research Technologies (http://members.driverguide.com/index.php?action=getinfo&companyid=318)

I doubt you will find any XP support for this old parallel port scanner. All I could find on driverguide.com are for Windows 9x.

You might wish to try this one: http://members.driverguide.com/driver/detail.php?driverid=27267