I seen on many places people asking for the switch setting for their tablets. I for one was one :disturbed. But fortunately I found my hardware manual. :) For those who are not as fortunate :furious: here is what the switches are:


SWITCH A
1,2,3 == MODE
Auto 0 0 0 (default)
Draw 0 0 1
Point 0 1 0
Draw Inc 0 1 1
Auto Inc 1 0 0
Remote 1 0 1
4,5 == LOGO MENU STRIP
Control (Internal or External)/Function (Enabled or Disabled)
INT/ENA 1 1 (Default)
INT/DIS 1 0
EXT/ENA 0 1
EXT/DIS 0 0
6,7,8 == BAUD
19200 1 1 1
9600 1 1 0 (Default)
4800 1 0 1
2400 1 0 0
1200 0 1 1
600 0 1 0
300 0 0 1
Auto 0 0 0

SWITCH B
1,2,3 == FORMAT
1 Binary Low Resolution 0 0 1 (Default)
2 Binary High Resolution 0 1 0
2B Binary High Resolution 1 1 0
3 Binary High Resolution 0 1 1
4 ASCII Low Resolution 1 0 0
5 ASCII High Resolution 1 0 1
4 == DATA BITS
8 1
7 0 (Default)
5 == PARITY
Enable 1 (Default)
Disable 0
6 == PARITY
Even 1
Odd 0 (Default)
7,8 == DATA RATE
100 1 1 (Default)
50 1 0
25 0 1
10 0 0

SWITCH C
1,2,3 == RESOLUTION
1000PPI English 1 1 0
400PPI English 1 0 0
200PPI English 0 1 0 (Default)
100PPI English 0 0 0
40LPMM Metric 1 1 1
16LPMM Metric 1 0 1
8LPMM Metric 0 1 1
4LPMM Metric 0 0 1
4 == CLEAR TO SEND
Enable 1
Disable 0 (Default)
5,6,7,8 == EMULATION (affects all switches)
Kurta Series 1 0 0 0 0
IS/ONE 8.5 x 11 0 0 0 1 (Default)
IS/ONE 8.5 x 11 0 0 1 0 (Default)
IS/ONE 8.5 x 11 0 0 1 1 (Default)
Summagraphics MM961/1201 1 0 0 1
Mouse 0 1 1 1
(Default depends on your model)


Hope this helps everyone that was asking.