Hi,

I have installed WinCE 5.0 & Platform Builder on a Windows XP desktop computer, having these characteristics:

- CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz
- RAM: 512 MB
- Hard Disk: 20 GB

My CEPC has the following configuration:

Processor : AMD Inc., i486
Mother Board : RS482M4
Chip set : ATI ® SB450
Hard Drive : Western Digital WD200BB-75AUA1

These are the steps I made:

- I followed the procedure mentioned in the Platform Help "How to Configure Hard Disk Drives on a CEPC" and added FAT file system / storage device/wordpad to the OS design and build the OS image nk.bin

- I booted another machine(CEPC) from the floppy which has the boot sequence
- I attached the Windows XP desktop computer to the CEPC through Ethernet & loaded the nk.bin to CEPC

Wince runs correctly on CEPC but I have some problems:

1) The hard disk drive is not recognized, even if in the OS design I have inserted all the needful drivers and applications, as explained in the Platform Help (section "How to Configure Hard Disk Drives on a CEPC").

2) The computer BIOS recognises hard drive.

3) Do the drivers of ATI ® SB450 support WINCE?

Can someone please give me some advice or also some useful link?

Thanks in advance.

--------------------------------------------------------------------------Bhavani