Please, I need this driver because the original one has corrupted and I canīt use the CD

Support Information:
Device Type: CD / DVD
Manufacturer: Samsung
Model: SW-252B
Interface: IDE
Operating System: Windows 98SE
Age of Device: < 2 years old
FCCID:

Type of drive: cd-rw, cd-rom (rewriter &amp; reader)
Location: internal
What recording software are you using?: Nero/version

Find it on DriverGuide (http://members.driverguide.com/index.php?action=srch&sm=b&aax=&qa6=911&qa5=3&qa7=1301&dp=2&qm0=SW-252B&jmd=and&fzz=d) | Find it with Google (http://www.google.com/search?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=Samsung+CD+%2F+DVD++SW-252B+Windows+98SE+) | Research manufacturer Samsung (http://members.driverguide.com/index.php?action=getinfo&companyid=911)

Optical drives never require a driver when used in any Windows os from 95 up. The Windows 98SE os provides native support that allows your drive to read a data or music disk. However, Win98SE does not provide any burning support. For that task compatible recording software (like Easy Cd Creator or Nero) is required.

Please state what your problem is, eg: non-detection of the drive by the os, other. Is the drive listed in My Computer and Device Manager? If not then you do have a non-detection problem. The following conditions can cause non-detection:

1: IDE port is not enabled in bios.
2: Probem with ide cable or connectors, cable partially dislodged from connectors, power cable partially dislodged or loose or not connected, etc.
3: Wrong ide driver installed. Check in Device Manager to insure the ide port is working ok.
4: Master/slave/CS jumper in wrong position.
5: Incorrect or wrong firmware flash attempts.
6: Defective drive