looking for driver for micro advantage 8dvd/rw-b13, dvdrw10081m, book says windows sould find it automatically but it's not, and it's not on the burner program that comes with it roxio ezcd 6.0 so i'm lost.
and the store won't take back because i opened it.

Support Information:
Device Type: CD / DVD
Manufacturer: Micro Advantage
Model: 8dvd/rw-b13
Interface: IDE
Operating System: Windows ME
Age of Device: Not specified
FCCID:

Type of drive: dvd-r/cd-rw (dvd burner, dvd reader, & cd burner combo)
Location: internal
What recording software are you using?: Easy Cd Creator/version

Find it on DriverGuide (http://members.driverguide.com/index.php?action=srch&sm=b&aax=&qa6=2283&qa5=3&qa7=1400&dp=3&qm0=8dvd%2Frw-b13&jmd=and&fzz=d) | Find it with Google (http://www.google.com/search?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=Micro+Advantage+CD+%2F+DVD++8dvd%2Frw-b13+Windows+ME+) | Research manufacturer Micro Advantage (http://members.driverguide.com/index.php?action=getinfo&companyid=2283)

Optical drives never require a driver when used in any Windows os from 95 up.

When the drive is properly connected/configured, the os should recognize the drive during bootup
and a listing should appear in Device Manager under CD-ROM showing the drive. If the os fails to
detect the drive, here are the most common reasons:

1: Improperly connected ide ribbon cable or defective cable/connectors.
2: Master/Slave jumper not set correctly.
3: Problem with the ide port to which the drive is connected or wrong ide drivers installed.
4: IDE port is disabled in bios.
5: Defective drive.

Burning software only provides burning support... it does not provide any support for reading a data or music disk. Depending of the type of recording software, it may contain support for reading dvd disks.