Need .inf file for the Win98 SE driver for HP LaserJet III. I found a Win98 driver for the LJIII and downloaded and tried it about 3 times but it was not helpful. Other members' comments mentioned needing a .inf file, which was not included, and seems to be the critical missing item. I think that file was from a "Jerry". Thank you.




Support Information:
Device Type: Printer / Plotter / Multi-Office
Manufacturer: Hewlett Packard (HP)
Model: LaserJet III
Interface: Parallel Port
Operating System: Windows 98SE
Age of Device: Not specified
FCCID:

Find it on DriverGuide (http://members.driverguide.com/index.php?action=srch&sm=b&aax=&qa6=456&qa5=15&qa7=1301&dp=3&qm0=LaserJet+III&jmd=and&fzz=d) | Find it with Google (http://www.google.com/search?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=Hewlett+Packard+%28HP%29+Printer+%2F+Plotter+%2F +Multi-Office++LaserJet+III+Windows+98SE+) | Research manufacturer Hewlett Packard (HP (http://members.driverguide.com/index.php?action=getinfo&companyid=456)

----
Send an email to akbar through DriverGuide's contact form (http://members.driverguide.com/vbemail.php?subject=DriverGuide.com%3A%20question% 28s%29%20regarding%20your%20driver%20request%20pos t%20of%2002%2F12%2F2005&action=form&recipient=geneharper@wwd.org)

: Need .inf file for the Win98 SE driver for HP LaserJet III. I found a Win98 driver for the LJIII and downloaded and tried it about 3 times but it was not helpful. Other members' comments mentioned needing a .inf file, which was not included, and seems to be the critical missing item. I think that file was from a "Jerry". Thank you.
:
You must have the Windows 98SE installation disk in order to install this printer.
Installation Instructions:

If the printer is hooked directly (parallel) to the computer, follow these instructions for standard installation of the appropriate printer driver.
1.Click Start, Settings, then Printers.

2.Double-click Add Printer.

3.Click Next.

4.Choose "HP" from the Manufacturer list in the left window.

5.Choose model "HP Laserjet III" from the printer list in the right window.

6.Click NEXT

7.Select Port (usually LPT1) then click Next.

8.Select Yes if this printer is the default printer, or select No if this printer will only handle selected print jobs. Click Next to continue.

9.Select No to skip the test page then click Next.

10.Click Finish to complete the installation.

11.If asked for a Windows disk, insert the appropriate Windows or PC Recovery disk and follow the instructions on the screen. Once the driver has been installed, it will be listed in the Printers window (Start, Settings, and Printers).

12.Close the Printers window and try printing.
If you have trouble with garbage printouts after installing this driver, check your lpt bios settings and make sure it's set to ECP instead of SPP. Also make sure you have a high compliant IEEE (double shielded) cable connected from lpt port to printer.





Support Information:
: Device Type:
Printer / Plotter / Multi-Office
: Manufacturer:
Hewlett Packard (HP)
: Model:
LaserJet III
: Interface:
Parallel Port
: Operating System:
Windows 98SE
: Age of Device:
Not specified
: FCCID: