|
| |
Humay:58:35 1/26/06 01-01-1970, 12:00 AM : : I could not make this printer to join to my wireless home network. I have XP Home and Professional. This printer is not willing to join to network through either platform. Current driver only recognizes the native USB 2.0 port when printer is directly connected to the computer.
: : I have a Linksys 54-G wireless printserver (model WPS54GU2) which has two ports - one parallel, and one USB 2.0. I've been trying to connect this printer to the printserver's USB 2.0 port from the printer's USB 2.0 port. So far I have been unsuccessful for the printer to recognize the printserver's port. Please help.
: : It is known to a few fortunate users that earlier driver version 1.2.928.0 is capable of solving above problem, but I was not sure which one to download since there are so many available in the driverguide.com website. I tried Windows 2000 version 1.2.928.0 driver, but it did not work. If someone had done it successfuly, please come forward to help by providing a link for the driver, AND some instructions. Thanks.
: :
: :
:
http://www.qms.com/support/current_printers/mc2400w_sup.htm#Drivers
These are the latest for sure, but wrong drivers for networking which I already have in my CD that came with the printer. Please re-read my outcry (original post) once again and help. Thanks.
Support Information:
: : Device Type:
Printer / Plotter / Multi-Office
: : Manufacturer:
KONICA MINOLTA
: : Model:
KONICA MINOLTA 2400W For Networking
: : Interface:
USB
: : Operating System:
Windows XP Professional
: : Age of Device:
< 6 months old
: : FCCID:
Humayun Kabir 01-16-2006, 04:06 PM I could not make this printer to join to my wireless home network. I have XP Home and Professional. This printer is not willing to join to network through either platform. Current driver only recognizes the native USB 2.0 port when printer is directly connected to the computer.
I have a Linksys 54-G wireless printserver (model WPS54GU2) which has two ports - one parallel, and one USB 2.0. I've been trying to connect this printer to the printserver's USB 2.0 port from the printer's USB 2.0 port. So far I have been unsuccessful for the printer to recognize the printserver's port. Please help.
It is known to a few fortunate users that earlier driver version 1.2.928.0 is capable of solving above problem, but I was not sure which one to download since there are so many available in the driverguide.com website. I tried Windows 2000 version 1.2.928.0 driver, but it did not work. If someone had done it successfuly, please come forward to help by providing a link for the driver, AND some instructions. Thanks.
Support Information:
Device Type: Printer / Plotter / Multi-Office
Manufacturer: KONICA MINOLTA
Model: KONICA MINOLTA 2400W For Networking
Interface: USB
Operating System: Windows XP Professional
Age of Device: < 6 months old
FCCID:
Find it on DriverGuide (http://members.driverguide.com/index.php?action=srch&sm=b&aax=&qa6=2450&qa5=15&qa7=1500&dp=0.5&qm0=KONICA+MINOLTA+2400W+For+Networking&jmd=and&fzz=d) | Find it with Google (http://www.google.com/search?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=KONICA+MINOLTA+Printer+%2F+Plotter+%2F+Multi-Office++KONICA+MINOLTA+2400W+For+Networking+Window s+XP+Professional+) | Research manufacturer KONICA MINOLTA (http://members.driverguide.com/index.php?action=getinfo&companyid=2450)
Jerry K 01-17-2006, 04:26 PM : I could not make this printer to join to my wireless home network. I have XP Home and Professional. This printer is not willing to join to network through either platform. Current driver only recognizes the native USB 2.0 port when printer is directly connected to the computer.
: I have a Linksys 54-G wireless printserver (model WPS54GU2) which has two ports - one parallel, and one USB 2.0. I've been trying to connect this printer to the printserver's USB 2.0 port from the printer's USB 2.0 port. So far I have been unsuccessful for the printer to recognize the printserver's port. Please help.
: It is known to a few fortunate users that earlier driver version 1.2.928.0 is capable of solving above problem, but I was not sure which one to download since there are so many available in the driverguide.com website. I tried Windows 2000 version 1.2.928.0 driver, but it did not work. If someone had done it successfuly, please come forward to help by providing a link for the driver, AND some instructions. Thanks.
:
:
http://www.qms.com/support/current_printers/mc2400w_sup.htm#Drivers
Support Information:
: Device Type:
Printer / Plotter / Multi-Office
: Manufacturer:
KONICA MINOLTA
: Model:
KONICA MINOLTA 2400W For Networking
: Interface:
USB
: Operating System:
Windows XP Professional
: Age of Device:
< 6 months old
: FCCID:
Humayun Kabir 01-17-2006, 06:14 PM : : I could not make this printer to join to my wireless home network. I have XP Home and Professional. This printer is not willing to join to network through either platform. Current driver only recognizes the native USB 2.0 port when printer is directly connected to the computer.
: : I have a Linksys 54-G wireless printserver (model WPS54GU2) which has two ports - one parallel, and one USB 2.0. I've been trying to connect this printer to the printserver's USB 2.0 port from the printer's USB 2.0 port. So far I have been unsuccessful for the printer to recognize the printserver's port. Please help.
: : It is known to a few fortunate users that earlier driver version 1.2.928.0 is capable of solving above problem, but I was not sure which one to download since there are so many available in the driverguide.com website. I tried Windows 2000 version 1.2.928.0 driver, but it did not work. If someone had done it successfuly, please come forward to help by providing a link for the driver, AND some instructions. Thanks.
: :
: :
:
http://www.qms.com/support/current_printers/mc2400w_sup.htm#Drivers
These are the latest for sure, but wrong drivers for networking which I already have in my CD that came with the printer. Please re-read my outcry (original post) once again and help. Thanks.
Support Information:
: : Device Type:
Printer / Plotter / Multi-Office
: : Manufacturer:
KONICA MINOLTA
: : Model:
KONICA MINOLTA 2400W For Networking
: : Interface:
USB
: : Operating System:
Windows XP Professional
: : Age of Device:
< 6 months old
: : FCCID:
Humayun Kabir 01-17-2006, 06:14 PM : : I could not make this printer to join to my wireless home network. I have XP Home and Professional. This printer is not willing to join to network through either platform. Current driver only recognizes the native USB 2.0 port when printer is directly connected to the computer.
: : I have a Linksys 54-G wireless printserver (model WPS54GU2) which has two ports - one parallel, and one USB 2.0. I've been trying to connect this printer to the printserver's USB 2.0 port from the printer's USB 2.0 port. So far I have been unsuccessful for the printer to recognize the printserver's port. Please help.
: : It is known to a few fortunate users that earlier driver version 1.2.928.0 is capable of solving above problem, but I was not sure which one to download since there are so many available in the driverguide.com website. I tried Windows 2000 version 1.2.928.0 driver, but it did not work. If someone had done it successfuly, please come forward to help by providing a link for the driver, AND some instructions. Thanks.
: :
: :
:
http://www.qms.com/support/current_printers/mc2400w_sup.htm#Drivers
These are the latest for sure, but wrong drivers for networking which I already have in my CD that came with the printer. Please re-read my outcry (original post) once again and help. Thanks.
Support Information:
: : Device Type:
Printer / Plotter / Multi-Office
: : Manufacturer:
KONICA MINOLTA
: : Model:
KONICA MINOLTA 2400W For Networking
: : Interface:
USB
: : Operating System:
Windows XP Professional
: : Age of Device:
< 6 months old
: : FCCID:
Manix Appunni 01-25-2006, 03:50 AM : : I could not make this printer to join to my wireless home network. I have XP Home and Professional. This printer is not willing to join to network through either platform. Current driver only recognizes the native USB 2.0 port when printer is directly connected to the computer.
: : I have a Linksys 54-G wireless printserver (model WPS54GU2) which has two ports - one parallel, and one USB 2.0. I've been trying to connect this printer to the printserver's USB 2.0 port from the printer's USB 2.0 port. So far I have been unsuccessful for the printer to recognize the printserver's port. Please help.
: : It is known to a few fortunate users that earlier driver version 1.2.928.0 is capable of solving above problem, but I was not sure which one to download since there are so many available in the driverguide.com website. I tried Windows 2000 version 1.2.928.0 driver, but it did not work. If someone had done it successfuly, please come forward to help by providing a link for the driver, AND some instructions. Thanks.
: :
: :
:
http://www.qms.com/support/current_printers/mc2400w_sup.htm#Drivers
Hello,
The link you have posted does have the latest drivers. I am particularly looking for the version 1.2.928.0 which supports networking. This version is available in driverguide.com but is corrupt.
Thanks for you help
Support Information:
: : Device Type:
Printer / Plotter / Multi-Office
: : Manufacturer:
KONICA MINOLTA
: : Model:
KONICA MINOLTA 2400W For Networking
: : Interface:
USB
: : Operating System:
Windows XP Professional
: : Age of Device:
< 6 months old
: : FCCID:
drkabir 01-26-2006, 09:58 PM I have the driver version 1.2.928.0. But I don't know how to configure it for network installation. Driver's interactive dialog box walks you through for local USB installtion only, not for network.
Let me ask you this. How do you want to connect your printer to the network? Is it through wireless print server, or wired print server?
drkabir 01-26-2006, 09:59 PM I have the driver version 1.2.928.0. But I don't know how to configure it for network installation. Driver's interactive dialog box walks you through for local USB installtion only, not for network.
Let me ask you this. How do you want to connect your printer to the network? Is it through wireless print server, or wired print server?
eric_prakoso 02-13-2006, 09:09 PM : I have the driver version 1.2.928.0. But I don't know how to configure it for network installation. Driver's interactive dialog box walks you through for local USB installtion only, not for network.
: Let me ask you this. How do you want to connect your printer to the network? Is it through wireless print server, or wired print server?
please send me driver for bjc 256sp for windows XP, thanks alot for canon
----
Send an email to eric_prakoso through DriverGuide's contact form (http://members.driverguide.com/vbemail.php?subject=DriverGuide.com%3A%20question% 28s%29%20regarding%20your%20driver%20request%20pos t%20of%2002%2F13%2F2006&action=form&recipient=eric_prakoso@yahoo.com)
eric_prakoso 02-13-2006, 09:09 PM : I have the driver version 1.2.928.0. But I don't know how to configure it for network installation. Driver's interactive dialog box walks you through for local USB installtion only, not for network.
: Let me ask you this. How do you want to connect your printer to the network? Is it through wireless print server, or wired print server?
please send me driver for bjc 256sp for windows XP, thanks alot for canon
----
Send an email to eric_prakoso through DriverGuide's contact form (http://members.driverguide.com/vbemail.php?subject=DriverGuide.com%3A%20question% 28s%29%20regarding%20your%20driver%20request%20pos t%20of%2002%2F13%2F2006&action=form&recipient=eric_prakoso@yahoo.com)
|
