I have a customer who has two completely different machines. One has a Chaintek Motherboard and the other is running an Asus. Whenever I attempt to intall WINME on either machine, I receive an SU0325 error at 10% of installation, which is a fatal error causing Setup to close. This has occured with TWO seperate WINME disks, and completely different hardware in each machine. I was able to get around it, by placing his Hard Drives in my slave machine at my shop, then transfering those Hard Drives back into his machines, but if anyone has any idea what a windows error of "SU0325" means, and what the fix is for it, I would greatly appreciate it.

Sean
ToastPC of Colo.
toastpc@hotmail.com
www.toastpc.bravehost.com

Read this Microsoft article and you will fully understand the cause and solution to the error. :)

http://support.microsoft.com/default.aspx?scid=http://support.microsoft.com:80/support/kb/articles/Q270/5/93.ASP&NoWebContent=1

OK I HAVE A VERY COOL FOR SOLVE THIS F*** I COULDN'T SLEEP BECAUSE I HAD THIS PROBLEM
FIRST! MICROSOFT SUCKS, THEY SAID THAT THE PROBLEM IS 'COS YOU HAVE A DIRTY CD OR A BROKEN CD-ROM
WRONG!!!
1.- Copy the entire CD on the Hard Disk my professor said that I need use a command like "DISKCOPY" or "XCOPY"
but... I used a program called MS-DOS 7.10 http://newdos.yginfo.net/dosware/dos71scd.zip

So... I installed that thing and I used a add-on called Commander... later I copied one by one file or folder...

I fix it!

UNIVERSIDAD NACIONAL AUTONOMA DE MEXICO